Search engine trouble codes.
Example: P0120
C3664 Daihatsu Atrai engine code seems a kind of chassis problem, we try to show one by one the meaning and the solution.
Brief explanation of the C3664 Daihatsu Atrai code and definition of C3664 Daihatsu Atrai is the bottom side.
c |
Chassis Code Problem is controller area network wiring bus and modules. |
3 | SAE - Generic |
6 | Vehicle Speed Control And Idle Control System |
6 | Control Module Throttle Actuator Position Performance |
4 | Cruise Vehicle Speed/Set Speed Difference Too High |
SAE - Generic codes, which have a '0' as their second digit to indicate they are common to all makes and models of vehicles. These are the codes that are required for basic emissions fault diagnosis.
How To Fix C3664 Daihatsu Atrai ?
Regarding the C3664 code, it would probably be worthwhile to carefully inspect the wire harness near the intake manifold bracket. This is done most easily from below the car in the area near the oil filter. |
The valves of each cylinder are kept closed using a pair of arms that replace the conventional engine's roller-type rocker arm. C3664 code one of these arms follows the cam profile while the second arm connects to the valves. During normal engine operation the two arms are joined by a locking pin. When you see C3664 Daihatsu Atrai engine fault code on your engine code reader this description will help you.
C Codes | List of all Chassis codes. |
Final Step: In the definitions listed below, there is a test drive recommended after you've completed any repairs to see if the condition is fixed. Before you take a test drive after a repair, always erase the C Code(s) first. This will turn the check engine light off and then you will know if the check engine light returns, you've got further diagnostics to complete.
BE CAREFUL !
This engine code information is presented for information purposes only. This is not intended as repair advice and we are not responsible for any actions you take on any vehicle.